Does your scanner have a black or white bit of plastic to hold down
the scanned item? If it's white it might allow more through from the
other side, however it might if it's black too, I don't have much
experience in scanning thin paper, perhaps some experimentation is
required? try some white/black paper behind it maybe?
good luck :-)
cheers
Adam
On 18 Nov 2006, at 08:28:30 -0500, "Sonny Hung" <sonnyhung@gmail.com>
wrote:
>
> Hi everyone...
>
> I'm sure someone out there might have some advice on this topic.
> I'm scanning in the German Newton Handbook for the NotePhone.
> Unfortunately the paper used for it's printing is a bit thin and the
> printing on the opposite side shows through a little when I scan it
> in... and suggestions to prevent/handle this without having to touch
> up the document too much or at all..
>
> TIA
> --
> God bless,
>
> Sonny Hung
> the Hung Family
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/Received on Sat Nov 18 16:38:50 2006
This archive was generated by hypermail 2.1.8 : Sat Nov 18 2006 - 18:30:00 EST