[NTLK] Line in options/WTB Replacement Screen

[Neal Trembath]

Grant's ref to Daniel's instructions will work w/ the mic circuitry.  Make sure that you are using a mono jack w/ a contact breaker, not a stereo jack.  No need to drill a hole in your case unless you are using the covered hole to the right of the serial port.

OT: 2100 screen cracked this morning (meteor shower casualty).  Does anyone have a very good condition replacement FS?

Thanks,
Neal

From: Grant Hutchinson <grant at splorp.com>

> To plug an external microphone into the mic circuitry, you will have  
> to hack: open your Newton, cut the mic wires, replace the Newton's  
> mic w/ a mono, mini jack.  A mini jack will easily fit in the  
> covered hole near the serial port.

Here are Daniel Padilla's instructions for his version of an "Internal  
Audio Out Connector":

http://dev.newtontalk.net/dpadilla/audio.htm