[NTLK] G4 Newton Interface Replacement

[Gregg]

> David
> I forgot to mention that I did that and removed the ram then reinstalled and tried it all over again- nothing gives. I got some good instructions from operator headgap, but I think the ps is fried even though lastly I took it apart to look for damage and saw none. Thanks for the help anyway. If you think of anything else please let me know.
Greg
> 
> On Mar 9, 2011, at 2:49 PM, David Kendal <dpkendal at dpk.org.uk> wrote:
> 
>> On 9 Mar 2011, at 20:43, Gregg wrote:
>> 
>>> My powermac g4 just bit the dust during a power outage
>> 
>> Mine did that; try resetting the PMU. Open it up and there should be a
>> small button on the logic board. On my Quicksilver it is next to the
>> battery; it might be in a different place on yours. Press it and hold
>> it for a second, then close it up and try booting.
>> 
>> — dpk.
>> 
>> 
>> 
>> 
>> ==================================================================== 
>> The NewtonTalk Mailing List - http://newtontalk.net/
>> The Official Newton FAQ     - http://splorp.com/newton/faq/
>> The Newton Glossary         - http://splorp.com/newton/glossary/
>> WikiWikiNewt                - http://tools.unna.org/wikiwikinewt/
>> ====================================================================