[NTLK] Newton 2000 Serial Connection NCX/Keyspan to Apple iMac G4
Gary Moors
garyjm2 at verizon.net
Sat Nov 26 22:54:11 EST 2011
It must be me but I just can't find the NCX preference settings. I tried everything else you suggested and no go. Where in the world are these settings :-). Maybe we are running different versions of NCX? There are no drop downs on my screen. All of the icons are grayed out because the connnect has not been established. I'm sure if you were here (or Simon Bell) you/he would see the problem immediately :-). I know, its just one small detail that is preventing me from getting this working. I'm so close and yet so far :-). When I get this working I will buy everybody a beer!
Thanks again,
Gary
P.S. Keyspan Serial Assistant shows the following:
KeySerial1
USA19H1b12P1.1
When I click on the Serial Ports arrow on the top menu bar I can change the ordering of these but neither order causes this to work.
________________________________
From: Forrest Buffenmyer <newtonphoenix at mindspring.com>
To: Gary Moors <garyjm2 at verizon.net>
Cc: NewtonTalk <newtontalk at newtontalk.net>
Sent: Saturday, November 26, 2011 7:00 PM
Subject: Re: [NTLK] Newton 2000 Serial Connection NCX/Keyspan to Apple iMac G4
(Gary--my reply is also going to the List so that others might be included, and perhaps assist or benefit from our discussion.)
In NCX's Preferences drop down, the serial connections that the program "sees" are listed. You would of course choose the Keyspan adapter (USA28X191, for example).
There are several speeds listed when you choose the Dock on the Newton, and then tap "Connect via"...some are here by default, others are added as you add packages or hardware. On my MP2100, these are:
Serial
Modem
Ethernet
IrDA
Serial--2400
Serial--4800
Serial--9600
Serial 115200
TCP/IP
Tony Kan has an excellent guide on getting started with NCX, found here... http://myapplenewton.blogspot.com/2010/09/connecting-mac-to-newton-using-ncx.html
You should be able to connect either by Serial alone, or Serial 115200, either of which worked for me. Eventually you should probably consider downloading the 115200 package, either on the Newton, or on the Mac--once you're able to connect the two successfully.
Please keep us informed as to your progress.
Thanks,
--Forrest
Sent from my First Generation iPad
On Nov 26, 2011, at 10:51 AM, Gary Moors <garyjm2 at verizon.net> wrote:
Thanks for your response Forrest. I didn't see different bps packages to install, just installed the one for OS X (supports up to 10.5). Is there a connection speed setting in NCX? I do have the 17" flat panel like you but I think the CPU is faster (I'll check). I am choosing the basic serial connection on the Newton, not one of the drop downs. I read that there is a NCX users manual somewhere but I have not been able to locate it. This has to be something really simple :-).
>
>
>
>________________________________
> From: Forrest Buffenmyer <newtonphoenix at mindspring.com>
>To: "newtontalk at newtontalk.net" <newtontalk at newtontalk.net>; Gary Moors <garyjm2 at verizon.net>
>Sent: Saturday, November 26, 2011 2:18 AM
>Subject: Re: [NTLK] Newton 2000 Serial Connection NCX/Keyspan to Apple iMac G4
>
>Do you have the 115,200 bps package installed? You'd need to match that in the Serial drop-down box.
>
>I've forgotten what the default connect speed is (9600?)...I use a Keyspan adapter with my MP2100 to connect to my iMac G4, which is one if the original ones (17" flat panel, 867MHz). When I connect, I only need to choose the basic Serial connection.
>
>(By the way, I'm not sure which iMac you have...but if it's like mine, did you know that there's a way to "trick" OSX into allowing you to install 10.5 (Leopard)? I did that with mine, it was pretty easy to install it.)
>
>Thanks,
>--Forrest
>
>Sent from my First Generation iPad
>
>On Nov 25, 2011, at 5:09 PM, Gary Moors <garyjm2 at verizon.net> wrote:
>
>> Greetings -
>>
>> I'm new to the Newton and Apple iMac so bear with me. I have had a collection of Newtons for quite a
while (acquired off Ebay and one of my passions from the past) and decided to finally get one connected to my iMac G4 (OS X 10.4.11). I have Windows 7 pc's also but heard it was much easier and better Newton support with the Apple Mac :-). Basically I just can't connect to the Newton 2000. I get a "The connection was stopped because there was no response" message from the Dock. I am using the Dock "Connect via Serial". I have tried two Newton 2000's, two serial cables, and two Newton Serial Adapters. I have also tried two USB ports on my Mac. Here are some additional details:
>>
>> Tripp Lite Keyspan USA-19H
>> Installed OS X driver (up to 10.5) USA-19HS MAC (keyspanUSdrvr.pkg).
>> Keyspan Serial Assistant shows:
>> KeySerial1
>> USA19H1b12P1.1
>>
>> Apple Mac shows USB Bus - Keyspan USA-19H
>>
>> NCX Newton Connection ver 1.3, build 44
>>
>> Can anyone help me out with this? I'm getting really frustrated spinning my wheels :-).
>>
>> Thanks!!!
>>
>> Gary
>>
>> ====================================================================
>> The NewtonTalk Mailing List - http://newtontalk.net/
>> The Official Newton FAQ - http://splorp.com/newton/faq/
>> The Newton Glossary - http://splorp.com/newton/glossary/
>> WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
>> ====================================================================
>
>
>
More information about the NewtonTalk
mailing list