[NTLK] No screen Input?

arceeHS arceehs at gmail.com
Mon Jul 2 20:43:13 EDT 2012

James, doesn't it seem like "the guy who repaired it" hasn't and needs to
do some more work?

I don't know where all you've been with this but have you tried taking the
battery pack out, with no power what-so-ever, and just letting the MP sit
for a day or so? You might want to hold in the reset after removing all
power and again before you reinstall the battery pack/hook up the AC
adapter. FWIW.


On Mon, Jul 2, 2012 at 7:02 PM, James Rogers <jhrogersii at gmail.com> wrote:

> Ok, I just don't seem to have any luck with Newtons. I just got my MP2000
> back from the guy who repaired it, and the screen doesn't accept input. I
> have done several soft resets, but to no avail. I can't do a hard reset,
> because I can't respond to the prompts on the screen.
> Is this a common problem? Is there anything else I should try, or is it
> more than likely something with the new motherboard or screen?
> James Rogers
> Writer- iSource.com
> Sent from my iPad
> ====================================================================
> The NewtonTalk Mailing List - http://newtontalk.net/
> The Official Newton FAQ     - http://splorp.com/newton/faq/
> The Newton Glossary         - http://splorp.com/newton/glossary/
> WikiWikiNewt                - http://tools.unna.org/wikiwikinewt/
> ====================================================================

More information about the NewtonTalk mailing list