[NTLK] No screen Input?
jhrogersii at gmail.com
Mon Jul 2 20:55:28 EDT 2012
Thanks! Holding reset while powered off did the trick!
Sent from my iPad
On Jul 2, 2012, at 7:43 PM, arceeHS <arceehs at gmail.com> wrote:
> James, doesn't it seem like "the guy who repaired it" hasn't and needs to
> do some more work?
> I don't know where all you've been with this but have you tried taking the
> battery pack out, with no power what-so-ever, and just letting the MP sit
> for a day or so? You might want to hold in the reset after removing all
> power and again before you reinstall the battery pack/hook up the AC
> adapter. FWIW.
> On Mon, Jul 2, 2012 at 7:02 PM, James Rogers <jhrogersii at gmail.com> wrote:
>> Ok, I just don't seem to have any luck with Newtons. I just got my MP2000
>> back from the guy who repaired it, and the screen doesn't accept input. I
>> have done several soft resets, but to no avail. I can't do a hard reset,
>> because I can't respond to the prompts on the screen.
>> Is this a common problem? Is there anything else I should try, or is it
>> more than likely something with the new motherboard or screen?
>> James Rogers
>> Writer- iSource.com
>> Sent from my iPad
>> The NewtonTalk Mailing List - http://newtontalk.net/
>> The Official Newton FAQ - http://splorp.com/newton/faq/
>> The Newton Glossary - http://splorp.com/newton/glossary/
>> WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
> The NewtonTalk Mailing List - http://newtontalk.net/
> The Official Newton FAQ - http://splorp.com/newton/faq/
> The Newton Glossary - http://splorp.com/newton/glossary/
> WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
More information about the NewtonTalk