[NTLK] More Flash in MP2x000? Who knows more?

[Woody Smith]

I don't have any technical info but I recall this thread
<http://marc.info/?l=newtontalk&m=103496003910379&w=2>

I also believe that David Humphrey (PCBMan) Was looking at expanding the memory of the eMate IIRC he was looking at using the ROM Board as well.

Woody

On Aug 19, 2013, at 1:13 PM, Matthias Melcher <mm at matthiasm.com> wrote:

> Hi. Hardware questions:
> 
> 
> When I remove the ROM board on my machine, I find unused pads in the back of the board. I beleive that that is the case with al ROM boards. Anyone correct me if I am wrong.
> 
> I also know that the Flash RAM can be extended by another 8MB through a card in the ROM slot. I also hear that is has been done, but I don;t know who did it or when.
> 
> 
> So here are my questions:
> 
> Is my assumption correct that those four free spaces in the back of my ROM card exist on all ROM cards?
> 
> If that is so, are they meant to take Flash RAM chips?
> 
> If they are, the documentation requires 28f016sa-compatible chips, but they use TSOP 56 cases. There are similar parts that have TSOP 48 cases that would fit, for example the 28f160 - maybe 28f016 vs. 28f160 is just a type. Could that be the case?
> 
> If all that is true, then I still find a few extra pads, probably needing resistors and caps. Does anyone know what values these need to be?
> 
> 
> Any help is greatly appreciated. Think 12MB Flash ;-)
> 
> 
> - Matthias
> 
> 
> ==================================================================== 
> The NewtonTalk Mailing List - http://newtontalk.net/
> The Official Newton FAQ     - http://splorp.com/newton/faq/
> The Newton Glossary         - http://splorp.com/newton/glossary/
> WikiWikiNewt                - http://tools.unna.org/wikiwikinewt/
> ====================================================================