[NTLK] eMate display fix.

[Woody Smith]

use the instructions on franks site at
<http://www.pda-soft.de/en/hardware/emate/disassembly/disassembly.html>
soldering is onle involved in releasing the speaker wires and backlight wires fro surface solder pads. A quick touch of iron should be all thats necessary. Reattachment usually doesn't require additional solder, but I prefer silver bearing solder for lower melt temperature.

good luck
Woody

On Dec 11, 2013, at 12:51 PM, Bradley Mattice <bradwart at gmail.com> wrote:

> Okay, so I just bought an eMate 300 and got it today. It's working fine at
> the moment, however the lower left side portion of the display bezel is
> split open at the seam, and given that I've heard a pop on occasion, I'm
> pretty sure one of the hinges split and pushed the bottom half open.
> 
> Is there a special kind of solder I need, or will cheap lead solder work
> when I'm reattaching the backlight and speaker cables? I've already got the
> how-to page, but the reassembly one doesn't appear to be done yet.
> 
> In the mean time, I don't plan on moving the display (it'll just stay in
> the open spot).
> 
> ==================================================================== 
> The NewtonTalk Mailing List - http://newtontalk.net/
> The Official Newton FAQ     - http://splorp.com/newton/faq/
> The Newton Glossary         - http://splorp.com/newton/glossary/
> WikiWikiNewt                - http://tools.unna.org/wikiwikinewt/
> ====================================================================