[NTLK] Battery Level Indication with Rechargeables in AA Tray

[Tony Morrow]

Sonny Hung built two rechargable battery tray prototypes several years. His information is documented on Flickr.
https://www.flickr.com/photos/sonnyhung/sets/72057594074185913/ 
https://www.flickr.com/photos/sonnyhung/sets/72057594079049821/

On Nov 15, 2014, at 11:30 PM, Kevin LaCombe <my_newton at wavecable.com> wrote:

> I can't find the link at the moment but I have a printed page (from Marco Mailand I think?) that details how he did the modification of a AA tray and the idea of a switch if you want to load alkalines as well.
> 
> On Nov 15, 2014, at 7:01 PM, Woody Smith <woodysmith at me.com> wrote:
> 
>> This is in fact a challenge. I scavenged thermister and polyswitch from an eMate battery pack. Thermister requires two contact pads and wires soldered to them, the difficult part is keeping the wires from interfering with the batteries. I ran them on the outside taking advantage of the alignment channels, trimming the tracks inside the silo was necessary to allow space. There is room at the end opposite the contacts for the Poliswitch. I cut the wire connected to the spring and managed to bridge the gap with the switch.
>> 
>> The Poliswitch is only necessary if you need it. If you need it and it isn’t there, these batteries can get extremely hot.
>> 
>> Woody
>> 
>> 
>>> On Nov 15, 2014, at 7:27 PM, Andrei Chichak <newton at chichak.ca> wrote:
>>> 
>>> You know, since the 2x00 used NiMH batteries in the bricks, it wouldn’t take much effort to rewire a AA sled to charge the cells.
>>> 
>>> I would think that the biggest hurdle would be adding an extra contact for a temp sensor. The polyswitch is for protection and - we’re all butch here grunt grunt - it can be deleted.
>>> 
>> ----------------------------------------------------------------------
>> 
>> The NewtonTalk Mailing List   http://newtontalk.net/
>> The Official Newton FAQ       http://splorp.com/newton/faq/
>> The Newton Glossary           http://splorp.com/newton/glossary/
> 
> ----------------------------------------------------------------------
> 
> The NewtonTalk Mailing List   http://newtontalk.net/
> The Official Newton FAQ       http://splorp.com/newton/faq/
> The Newton Glossary           http://splorp.com/newton/glossary/