[NTLK] Internal WiFi Project

[Randy Glenn]

Sad to hear that the JAE connector is no longer obtainable. I recall you
used a Samtec connector for the BT-001 - aside from it being too tall, were
there other issues with fit? Datasheet says the row spacing on that one is
1.2mm, whereas the JAE connector is 1.5mm.

Thanks,

-Randy

On Tue, Dec 22, 2015 at 5:29 PM, Jake Bordens <jake at allaboutjake.com> wrote:

> Its the end of the year, and I wanted to wrap up some loose ends on the
> Internal WiFi project.
>
> First, I created a new "port cover" that works with the WiFi board
> installed.  See the picture here:
>
>         http://retronewton.blogspot.com/2015/12/3d-printed-port-cover.html
>
> Second, I posted all of the files to GitHub, including the PCB design, the
> Newton PKG and source code, and the 3D models of the port cover:
>
>         https://github.com/jake-b/Newton-Internal-WiFi
>
> There's also a model of the original (unmodified) port cover part that you
> can print if you need one.  (You'll want to add supports so that the tabs
> print correctly)
>
>
> Jake
>
> ----------------------------------------------------------------------
>
> http://newtontalk.net/
>