[NTLK] 210 rechargable pack?

["Piotrowski Paweł (Newton)"]

By ANSI standard all NiMh AA batteries must have 14.5 x 50mm. The only difference can be because of cover foil. But this is not a big problem - you always can take off this foil. And will be fine ;)

Anyway, I think 2500mAh will be enough for Newton.


Best regards,
Pawel Piotrowski

NPDS Server: http://applenewton.co.uk (powered by Newton 2100)
NPDS Tracker Server: http://tracker.applenewton.co.uk:3680 (powered by Raspberry Pi)

On 2 May 2016, at 23:17, Woody Smith <woodysmith at me.com> wrote:

> Physical tolerances are very tight. sometimes the higher Ah cells are slightly larger. This can cause problems with closing the case and fit within the silo.
> 
> Woody
>> On May 2, 2016, at 10:40 AM, Ron Erickson <rte7x9 at gmail.com> wrote:
>> 
>> Pawel,
>> 
>> Thanks for the clarification! I will keep that in mind for the next one.
>> 
>> -Ron
>> 
>> On Mon, May 2, 2016 at 10:02 AM, "Piotrowski Paweł (Newton)" <
>> newton at indigi.co.uk> wrote:
>> 
>>> Ron, you can use ANY NiMh rechargeable cells. Yours are 2Ah, but I saw on
>>> eBay 3.3Ah even cheaper.
>>> 
>>> 
> 
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk