[NTLK] Newton Power Adapters

["Piotrowski Paweł (Newton)"]

Sylvain

Newton 100 have info on the back that it need 7V/0.45A. So, it can’t be 5V…



Best regards,
Pawel Piotrowski

NPDS Server: http://newton1.applenewton.co.uk (powered by Newton 2100)
NPDS Tracker Server: http://tracker.applenewton.co.uk:3680 (powered by Raspberry Pi)




On 30 May 2016, at 13:06, Sylvain Pilet <pilets at mac.com> wrote:

> Hi Pawel,
> 
> 
> The 7.5V AC adapter is for eMate/MP2000/MP2100
> The 5V is for 1x0 models (they do not recharge the batteries, and screen is more small)…
> 
> 
> 
> Sylvain Pilet
> 
> - A P P L E  N E W T O N  N P D S -
> - Apple Newton NPDS Server: http://message-pad.no-ip.org
> - Apple Newton NPDS Tracker: http://message-pad.no-ip.org:3680
> 
> - A P P L E  N E W T O N  &  M O R E -
> - http://message-pad.net
> 
> Le 30 mai 2016 à 10:09, Piotrowski Paweł (Newton) <newton at indigi.co.uk> a écrit :
> 
>> Hi!
>> 
>> I’m trying build kind a multi-power supply for my 4 Newtons. It is obvious that power parameters are 7.5V and 1.2A DC.
>> 
>> What I found on Newton FAQ:
>> 
>> http://www.splorp.com/newton/faq/newton-faq-hardware.html#IIB7
>> 
>> But some guy wrote that 5V and 400mA works fine… I’m confused. 5V is not enough, especially 400mA…
>> 
>> 
>> Any ideas?
>> 
>> 
>> Best regards,
>> Pawel Piotrowski
>> 
>> NPDS Server: http://newton1.applenewton.co.uk (powered by Newton 2100)
>> NPDS Tracker Server: http://tracker.applenewton.co.uk:3680 (powered by Raspberry Pi)
>> 
>> ----------------------------------------------------------------------
>> 
>> http://newtontalk.net/
>> http://twitter.com/newtontalk
> 
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk