[NTLK] Newton USB Dongle

[Jake Bordens]

I’m using this one through a Newton serial cable and the standard  Interconenct dongle: http://a.co/gLgpxns


On 2/5/17, 8:29 AM, "newtontalk-bounces at newtontalk.net on behalf of "Piotrowski Paweł (Newton)"" <newtontalk-bounces at newtontalk.net on behalf of newton at indigi.co.uk> wrote:

    Any link, name, type?
    
    
    
    > On 5 Feb 2017, at 12:47, Jake Bordens <jake at allaboutjake.com> wrote:
    > 
    > I recently purchased a FDTI serial cable for use in Mac OS Sierra and it worked without drivers.. I had a prolific-chipset cable but the driver was causing my machine to crash, so I decided to get the FDTI since it was more compatible, and apparently did not need drivers (though I do a lot of tinkering so its possible I had a driver installed for another device. 
    > 
    > I find it suspicious that it doesn’t show up as a USB device with a PID/VID in the profiler… that would indicate that it isn’t even showing up on the USB bus.  However silly, maybe try a different USB cable, sometimes cheap USB cables are charge-only. I’ve gotten bitten by that before.
    > 
    > Side note, I would like to acquire one of these “Adriano” dongles, if anyone has a stash of them and is willing to part with one. Would make development a little easier. My guess is that they are rare, and folks don’t want to part with them, and for that I’d understand.
    > 
    > 
    > 
    > 
    > ----------------------------------------------------------------------
    > 
    > http://newtontalk.net/
    > http://twitter.com/newtontalk
    
    ----------------------------------------------------------------------
    
    http://newtontalk.net/
    http://twitter.com/newtontalk