[NTLK] AA battery trays

[NewtonTalk]

> Come to think of it, wasn't there an attempt to make these via 3D printing
back around 2010? 

There was. I had one of these animals made by a professional 3D printing
company. The result was not really bad, but neither was it really good. For
one, it was a bit on the wobbly side. Moreover, it was missing the front
part (what you see when the pack is inserted). But the biggest problem was
that it does not have the metal contacts. So you must either make these
contacts yourself, or you need a broken battery holder as an organ donor.

Frank

-- Newton software and hardware at http://www.pda-soft.de