[NTLK] Problem with connecting my eMate to my Mac
Sylvain Pilet
sylvain at pilet.net
Sat Aug 29 09:54:14 EDT 2020
Fabrice,
Ah yes it's normal, the eMate is capricious with memory cards! (In real, eMate it is not capricious, but uses the cards differently than the other Newton.)
There are very few cards that work in write/read on the eMate, in any case all the ones that work on the other Newton, don't necessarily work on the eMate as you just realized. The red and black Apple memory cards of 1, 2 and 4Mb don't work in write mode on eMate.
Below is a picture of some cards I have in my possession that work read/write on eMate.
http://message-pad.net/Download/Products-Pictures/Flash-Cards/FLASH-CARD-FOR-APPLE-Emate-ok.jpg
> Hi Sylvian
>
> following your advice I tried to insert an old Memory card into my eMate.
>
> I found two old Flash Card cards that I used with my old MP 120. But when I insert both in the eMate I always get the error message:
>
> „Writing to this type of card is unsupported. This card will be mounted read only.“ Then there is a lock icon near „Flash Storage card“.
>
> I first thought that I had manually activated the „write protection“, but both card are unlocked.
>
> Anything I can do to write on these cards?
>
> Salut
> Fabrice
>
Sylvain Pilet
http://message-pad.net
http://messagepad.no-ip.org:3680 [NPDS Tracker]
More information about the NewtonTalk
mailing list