[NTLK] [ANN] mbedTLS 2.16.6 for NewtonOS

Ronnie Simon ronnie_simon at me.com
Sun Jun 14 10:57:34 EDT 2020


Hello Paul

I am impressed and I wonder if this works better with stunnel as well.

Ronnie 

> On 14 Jun 2020, at 15:11, Sylvain Pilet <sylvain at pilet.net> wrote:
> 
> Paul,
> 
> I confirm the necessity to have an MP2100, I just tested mbedTLS (with your little utility) on an MP2000, result : as long as we stay on a non SSL/TLS connection it's ok, as soon as we try on a secure port it freezes the Newton MP2000.
> 
> Otherwise I tested on an MP2100, and in particular with MailV. Result it works very well, I was able to connect to an IMAP box on my site message-pad.net, which is hosted by ionos and I manage to receive and send emails on the secure ports! It's just incredible!
> You can see that the transaction requires a lot of effort from the MP2100 but it works without any problem.
> 
> On the other hand I noticed something strange: if there is a memory card in the second PCMCIA port, when we launch an SSL/TLS connection the Newton does a Reset! Not always, but here I am at 75% reset with a memory card present and 0% without card... it must be a too high demand of energy, I have however an original power supply of the MP2100 tested recently. 
> 
> 
> [FR]
> Paul,
> 
> Je confirme la nécessité d’avoir un MP2100, je viens de tester mbedTLS (avec ton petit utilitaire) sur un MP2000, résultat : tant que l’on reste sur une connexion non SSL/TLS c’est bon, dès que l’on essaye sur un port sécurisé cela gèle le Newton MP2000.
> 
> Autrement j’ai testé sur un MP2100, et en particulier avec MailV. Résultat cela fonctionne très bien, j’ai pu me connecter sur une boîte IMAP de mon site message-pad.net, qui est hébergé par ionos et j’arrive bien à recevoir et envoyer des mails sur les ports sécurisé ! C’est tout simplement incroyable !
> On voit bien que la transaction demande beaucoup d’effort au MP2100 mais il travail sans problème.
> 
> Par contre j’ai remarqué quelque chose d’étrange : si il y a une carte mémoire dans le second port PCMCIA, quand on lance une connexion SSL/TLS le Newton fait un Reset ! Pas toujours, mais là j’en suis à 75% de reset avec une carte mémoire présente et 0% sans carte… cela doit être une trop forte demande d’énergie, j’ai pourtant une alimentation d’origine du MP2100 testée récemment. 
> 
> 
> 
> Sylvain Pilet
> 
> http://message-pad.net
> http://messagepad.no-ip.org:3680 [NPDS Tracker]
> 
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk



More information about the NewtonTalk mailing list