[NTLK] Siemens Note Phone

[Sylvain Pilet]

> Le 13 nov. 2020 à 22:51, Sonny Hung <sonnyhung at gmail.com> a écrit :
> 
> Sylvain,
> 
> Yes, I'm certain you could make a cable for your French telephone socket.
> 
> Here is a picture of the Frank's test on my NotePhone Newton.
> https://flic.kr/p/9BsNM
> 
> Here is a picture of the lockboard for the Base Unit.
> https://flic.kr/p/kRc9f
> 
> The bottom curve is the left side of the Base Unit where the speakerphone
> speaker is located. Curved White Line
> 
> Here is a picture of the portion of the logicboard that I'm thinking is the
> problem.
> https://flic.kr/p/2gsZR
> …
> …
> I would guess Frank has a better understanding of this problem and
> hypothesize a more cogent theory.
> 
> If anyone has any idea how to fix this please chime in.
> 
> God bless,
> 
> Sonny Hung
> the Hung Family
> 

Thanks Sonny, you've already done the job!
The circuit board does not appear to be multilayer, but only on both sides of the board, it's already simpler than having to do an X-ray to understand the wiring.

I will test mine to see if it has the same defect.


[FR]
- - -
Merci Sonny, tu as déjà fait le boulot !
Le circuit imprimé ne semble pas être du multicouches, mais  seulement des deux côté de la carte, c'est déjà plus simple que de devoir faire une radiographie pour comprendre le câblage.

Je ferais des teste sur le miens pour voir si il a le même défaut.
- - - 


Sylvain Pilet

http://message-pad.net
http://messagepad.no-ip.org:3680 [NPDS Tracker]