Re: [NTLK] Ethernet on 130????

From: Victor Rehorst (victor_at_newtontalk.net)
Date: Fri Oct 12 2001 - 12:51:31 EDT


On Fri, 12 Oct 2001, Ken Whitcomb wrote:

> FWIW, I have an access point and (1 mb/sec) wireless card that works on my
> 120 and 130. The access point connects to my ethernet lan by either 10BT or
> 10Base2 connections. I'm able to print and to connect to NCU with this
> setup.

Yes, this is the DaynaCOMM Roamer. Refer to:

http://www.chuma.org/newton/faq/newton-faq-hardware.html#IIB2c

This card will ONLY DO APPLETALK. NOT TCP/IP. This means that you could
do:

-Connections to printers which support AppleTalk (Apple, some HP)
-Connections to Macs running NCU or NBU

You could NOT do:

-E-Mail
-Web browsing
-anything internet-related

There would also be NO WAY to "encapsulate" TCP/IP over AppleTalk to try
and do these things, because the card is not recognized by NIE. It
operates totally seperately from NIE.

Sorry about all of the caps, but I want to get the info out there before
people start throwing things out and discussing in vain. It's just not
possible. SOrry.

--
Victor Rehorst - victor_at_newtontalk.net - chuma_at_chuma.org
NewtonTalk list administrator - http://www.newtontalk.net
Will help you with your list problems - as long as you're nice.

-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe



This archive was generated by hypermail 2.1.2 : Thu Nov 01 2001 - 10:01:59 EST