on 8/8/02 9:32 AM, Robert Locatelli at sickofthecrap_at_mac.com wrote:
>
>> I just moved from hubs to switches in my home network.
> ...
>> It seems that the initial connection to the switch if problematic. Never
> had
>> this problem with my hubs. Suggestions?
> Maybe your ethernet card in the Newton cannot properly do the speed
> negociation. To test this you could go from Newton to the hub and then
> connect the hub to the switch. That would force the switch to 10MBps,
> assuming you got an elder hub.
> --
> With best regards / Viele Gruesse
>
> Marco Mailand
> http://slsbd.psi.ch/timing
> http://slsbd.psi.ch/~mmailand
> https://www.paypal.com/refer/pal=YYD3VUXUVD2YG
>
>
Yes, I did try this (Newt->10baseT hub->switch->DSL modem) and it worked
just fine. Trouble is that I do not want to go through the hub all the time.
RB
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.chuma.org/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net/
This archive was generated by hypermail 2.1.2 : Thu Sep 05 2002 - 10:02:52 EDT