On Wed, 12 Jun 2002, T. wrote:
> Hi all,
> I am trying to get my little eMate to surf the web, do the email
> thing, etc. I installed the newest OS for it, installed all the NIE
> 2.0 components, etc. I configured my internet setup as Mac IP Server
> Manual, and assigned it the IP address that my firewall is passing to
> it. But that is the problem. The eMate wasnts to find a Mac IP
> Server. I don't know that I have one. Do I? My firewall does DHCP &
> ANAT, but not Mac IP Server. So, how do I tell this cutey to see the
> DHCP server as it complains of failure due to DNS error? I am trying
> to do this over LocalTalk as I cannot find my ethernet dongle that
> plugs into my 3Com card. Lost it a few years ago & it is lonely
> wanting its cable/dongle-thing.
Well if you want to connect vial localtalk you will need a Nac IP server.
You most likely do not have one. (Do you have zones on your local talk
network?) You can set up a Mac IP server using a macintosh and the
appropriate software, but I assume that is not what you want. If I ere you
I would buy a new ethernet card. Meanwhile there is a sufficient range of
cards supported by the newt and some of them are really inexpensive.
-- Andrew Maier Andrew.Maier_at_cern.ch God is real, unless declared integer
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:02:21 EDT