Am 31.3.2002 15:34 Uhr schrieb "Kent Jonsson" unter <kent_at_sm4tfe.com>:
> I did try it w/o the tester, no difference.
This is consistent, that's good. I think it's simply a crossed connection
where it should be a straight one.
> Also, with the adapter the GPS transmits on pin 3 (RxD), and the handshake
> LEDs goes away if I choose another port (ir, Pccard...).
In my case the GPS drives only the RD LED which is always green and turns
red each 2 seconds (always the other time of the each sampling, which is
indicated by a LED in the GPS receiver). All other LEDs are dark, which
could be an indication of a wrong cable. However, this was w/o connection
the Newton to the other side of the serial tester.
-- With best Regards / Viele Gruesse!Marco Mailand
http://slsbd.psi.ch/timing http://slsbd.psi.ch/~mmailand/ https://www.paypal.com/refer/pal=YYD3VUXUVD2YG
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:51 EST