Re: [NTLK] I need a screw driver to open my eMate..

From: Humphreys, David (URB) (david.humphreys_at_honeywell.com)
Date: Fri May 24 2002 - 14:00:32 EDT


And I would buy the secure torx drivers as these can be also used
on regular torx screws.

The secure torx has a hole in the center to accommodate
the pin that is in the center of secure torx screws.

This will save you having to buy two drivers.

PCBman

> -----Original Message-----
> From: Stephanie Maks [mailto:newton_at_maksystems.com]
> Sent: Friday, May 24, 2002 11:59a
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] I need a screw driver to open my eMate..
>
>
>
> The eMate uses the following:
>
> Torx T-8 for the battery compartment and the screen bezel
> Torx T-10 for the rest of the case
>
> -Stephanie
> http://www.felesmagus.com/newton/
>
> > Sears carries them. You will need the one with the
> > green tip on the handle. (I believe that is a Torx8,
> > at least that's what Apple used for everything!) but I
> > got the whole set because...you never know...
> > Ed
> > web/gadget guru
>
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Wed Jun 12 2002 - 20:02:43 EDT