Re: [NTLK] 10.2 and NCU

From: Billy Romanow (billyromanow_at_mac.com)
Date: Thu Sep 26 2002 - 22:16:32 PDT


Hi Diana-
        I was also having this problem with this same setup when I
upgraded to 10.2. As others had suggested, I booted into OS 9.2 and
made sure that AppleTalk was on, etc. but this did not change
anything (it might be necessary, but it wasn't sufficient). Turns
out that I just couldn't use an Ethernet cross-over cable anymore.
If I have both my Newton and my Powerbook hooked up directly to my
router or connected through a hub, all is well. It seems that 10.2
won't report to Classic apps like NCU that AppleTalk is active when
using a cross-over cable for some reason. (Interestingly, the
cross-over does work when I boot into 9.2.)

Hope that this help-

Billy

>
>Date: Thu, 26 Sep 2002 20:08:27 -0700
>Subject: [NTLK] 10.2 and NCU
>From: Diana Oakley <dianajoakley_at_highstream.net>
>
>
>NCU and appletalk work fine with an ethernet connection to 9.1.3. When
>I try to use NCU on 10.2 through classic and try to turn on appletalk,
>I'm informed that "this is not supported by Classic." Any way around
>this? Anyway to get Classic to load faster? Can I access NCU through
>10.2 and Classic?
>
>TIA!
>
>Diana Oakley

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.chuma.org/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net/


This archive was generated by hypermail 2.1.5 : Mon May 26 2003 - 12:59:22 PDT