From: Andrei Chichak (acpmiedm_at_telusplanet.net)
Date: Tue Dec 09 2003 - 15:58:24 PST
Okay, so we know that when you try to connect from the newt, RX blinks and
when you send from HT, TX blinks. That sounds exactly correct. You most
likely have a good physical connection. You can always try to connect from
the newt and see what comes up in HT, but it is pretty academic at this point.
Shut down HT and bring up the NCU and check your port settings. Make sure
you are using COM1. By the way, turn off the FIFOs on the serial port if
you can. Try to connect.
Andrei
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Wed Dec 10 2003 - 09:30:00 PST