Re: [NTLK] Dock via the Internal SER-01 port on the 2100

You are exactly right. My Keyspan USB/PDA adaptor is not compatible
with the Newton serial one.

To prove it, I had plugged my 2100 into a serial port of my beige G3,
and use Newten to transfert packages, and it worked perfectly. So the
problem is really between the adaptor and the 2100 serial board.

Thanks

Le 06-10-23 à 05:18, Adriano a écrit :

> Hi Steve,
>
> your problem may depend mainly to the usb adapter you are using,
> or also to which type of serial cable your setup is connected to.
> Infact if you own a serial pass-through cable, often used to connect
> to fax/modems,
> you should then configure your usb adapter to accept modem
> connections.

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/