On Wed, 23 Aug 2000 Robert Benschop wrote:
-----------
>Was this difficult to do Kenny ? I got the PDA Panache pen over the summer
>and still wonder why I went with the out of the box stylus for so long,
>an even better tip sound interesting.
>
>
>Robert Benschop
-----------
Here's how I did it Robert.
Removing the PDA Panache tip is the easiest part. Just use a long nosed plier to slowly ease it out by turning. The tough part is removing the Cross tip. It took me a good half hour. This involve cutting through the metal tube and tearing them open carefully without scaring the soft Cross tip. The Cross tip's diameter is smaller than the PDA's so you need to insert it into a bigger tube then inserting that into the PDA stylus. I use the hollow plastic tube of a cotton bud (UK) or a Q-Tip (in the US). Make sure it's a tight fit or add a little super glue.
Here's the catch. Make sure the length of the installed tip is exactly the same as the stock stylus. If not, the stylus will not stay in the stylus holder or worse yet, it get's caught in the holder.
This is not a very difficult procedure and is well worth the effort if you like the Cross tip, the PDA Panache stylus and the convenience of a stock stylus in its original holder.
Kenny Song
<Sent with Newton MP2100/SimpleMail/4.1.2>
***************************************
NewtonTalk brought to you by:
EVOTE.COM -- the ESPN of politics on the Internet! All the players, all the news, and the hottest analysis and features (plus 'toons!) anywhere.... visit http://www.evote.com today!
***************************************
Need Subscribe/Unsubscribe info?
Visit the NewtonTalk section at http://www.planetnewton.com
This archive was generated by hypermail 2b29 : Fri Sep 01 2000 - 00:00:14 CDT