------
Even with the Newton plugged in (for modem or ethernet use) oftentimes
the Newton will simply not turn on. The only way to get it to turn back
on is to unplug it from the wall, pull the battery, then put the battery
back in. After a few of these cycles it will come back on, announce the
battery was dead, and then go about its business until the next time.
It's strange, because it doesn't always happen every time I turn the
Newton off; it's definitely sporadic.
------
Are you sure your Newton is charging? I had a new pack that charges inconsistently and would sometimes just die the moment I use the modem. I traced it down to poor contacts, and the problem was resolved after I cleaned all metal parts. Using a contact cleaner did not work for this battery. I had to sand the contacts!
The reason why your Newton won't turn on is because the battery was really drained but kept enough charge to keep it from booting up. (Can't explain why, may Frank can help).
Removing ALL power usually free up your Newton for a reset.
Kenny Song
<Sent with Newton Messagepad/SimpleMail v 3.3.1d1>
******************************************
This month's NewtonTalk brought to you by:
EVOTE.COM, the ultimate Political Junkie site on the 'Net.
The Clinton Administration, the George Bush
2000 Campaign, and almost every other major
U.S. politician has said something nasty
about us at some time. Find out why at:
http://www.evote.com
******************************************
Need Subscribe/Unsubscribe info?
Visit http://www.planetnewton.com
This archive was generated by hypermail 2b29 : Wed Mar 01 2000 - 00:00:04 EST