Do you have another machine that you can communicate with Hyperterminal?
What command are you issuing on the newton to initiate the connection?
Have you a unix box that you can run tcpdump on?
M
> Ok. Now it's my turn to ask for help.
>
> I am trying to establish communications between my MP2x00 and
> my PC using hyperterminal.
>
> The set-up is this:
>
> Newton with 3C589C Etherlink card. All drivers installed and working.
> Connect via TCP/IP (TT) selected.
>
> IP address chooser
>
> Dock to DEEP_THOUGHT
> Address 90.0.0.1
> Port 80
>
>
> Internet setup:
>
> Ethernet
> Configuration: Manual
> Card: 3Com 3C589 PC card
> Subnet Mask: 255:255:255:0
> Local IP: 90.0.0.5
> Gateway/Router Address: 90.0.0.1
> Primary DNS: 90.0.0.1
> Domain name : DEEP_THOUGHT
>
> On the PC:
>
> Hyperterminal is set to listen on 90.0.0.5 port 80
>
> I have a 4 port hub that the newton and my PC are hooked to.
>
> I start the connection on my newton and the ethernet led lights on the cable
> It says establishing a link then waiting for a response then times out.
>
> I know I have one or more settings wrong but I am lost.
>
> Can anyone help?
>
> Regards,
>
> David Humphreys
>
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sun Sep 09 2001 - 19:49:59 EDT