Hi Nitin!
TY a LOT for the help!!!
Alex
> From: newton2k <newton2k_at_mac.com>
> Reply-To: newtontalk_at_newtontalk.net
> Date: Wed, 21 Nov 2001 18:12:40 -0800
> To: newtontalk_at_newtontalk.net
> Subject: Re: [NTLK] Ethernet card (3c589d-tp) doesnt work!! ;-(
>
>
> hi alex
>
> i have the same card and got the same error as you when i first put it=20=
>
> in.. almost gave me a heart-attack cuz i thought the card was bad :)
>
> turns out that i had forgotten to install the 3com driver addon to the=20=
>
> farallon card-driver... you need to download and install:
> http://www.chuma.org/newton/ethernet/3comaddon.pkg
>
> check this site for more info (excellent site - maintained by victor):
> http://www.chuma.org/newton/ethernet/
>
> once you have the 3comaddon installed, when you insert the card, you=20
> won't get any auto-slip popping up, but it should work ok when you try=20=
>
> to connect.
>
> good luck and cheers,
> nitin
>
>
> On Wednesday, November 21, 2001, at 06:37 PM, Alexander Andrade Leao=20
> wrote:
>
> Hello guys,
>
> I just received a 3com PCMCIA Etherlink Lan PC Card (3c589d-tp) from
> Computer-Show but it doesnt work!!! ;-(
>
> I got a error message (-61001) when I insert this card. I saw this error=20=
>
> in
> "http://guelph.unna.org/errors/" and there I knew that this is a driver
> error. But i have the "3com 3C589D PC Card" driver in my Newton 2100 (I=20=
>
> got
> the driver at UNNA.ORG), NIE Ethernet, Newton Devices and etc.
>
> Thanks a lot for ANY help...
>
> ------------------
> Alex Le=E3o
> ....\|/....
> o(^ ^)o
> .....*.....
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sat Dec 01 2001 - 20:03:37 EST