I use a case from PDA Concepts that is large enough
to hold both the Newton and keyboard. It will also
hold your pcmcia cards and an extra battery set.
Mike
---------- Original Message -------------------------
---------
From: "Eric L. Strobel" <fyzycyst_at_home.com>
Reply-To: newtontalk_at_newtontalk.net
Date: Tue, 02 Oct 2001 12:03:29 -0400
>
>at the temporal coordinates: 10/2/01 11:47 AM, the
entity known as John M.
>Powell at iwillbefreedotcom_at_earthlink.net conveyed
the following:
>
>>
>>> Something I never seem to be able to find is a
case for Newt + keyboard
>>> that's just a hair larger than a DayTimer.
Anyone have any leads on
>>> something like that??
>>>
>>> - Eric.
>>
>> Well, I've just about settled on a Franklin
Planner case that probably
>> would fit both. It's about $110, so I'll have to
wait on it, but most
>> likely the one I'll go with. It's got a 2"
spiral, so there's room for
>> Franklin's material along with the newt, and wide
enough to put in a
>> couple accessories. I haven't done a measurement,
but I'll bet the kybd
>> would fit in it. The Americana Classic w/2"
rings, available in black
>> or burgundy.
>>
>> John
>>
>
>Well, by my measurements, if the Newt and keyboard
will be on top of each
>other when the case is closed, the case needs to be
11" x 4.5" x (at least)
>2.5". If the intent is to have the Newt in
landscape mode across the top of
>the keyboard, then the measurements I get are 11" x
about 10" x (at least)
>1.25". The 10" is to account for the keyboard
connector going into the
>"top" of the Newt in this orientation.
>
>Someday, perhaps, I'll take my little tape measure
into Staples...
>
>- Eric.
>
>
>--
>This is the Newtontalk mailinglist -
http://www.newtontalk.net
>To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?
Subject=unsubscribe
>
>
_____________________________________________________
___________
Sent via the EV1 webmail system at mail.ev1.net
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Thu Nov 01 2001 - 10:01:29 EST