On 17/04/02 14:50, "hubertus" <hubertus_at_mac.com> wrote:
> Thank you all for the replies. Hope to get a real base station soon.
> But does NAT also stop my newton from seeing my Laser Printer. I ask
> this because I never got my newton to see my printer even not with a
> localtalk bridge. It is a gcc elite 1200. Perhaps I will be able to
> print my first page from my newton after all these years?
If it's a PostScript printer and you're able to use the LaserWriter chooser
extension, you should be able to print to it from your Newton. You mention a
LocalTalk bridge. Does this mean that this printer has LocalTalk port only?
If so, you need the LocalTalk bridge. If you can see the printer from your
Mac in the Chooser, then you should be able to see it too from the printing
chooser on your Newton. Make sure you choose "Other network printer...".
-Laurent.
-- ===================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ********************** Usual disclaimers apply ********************** C Programmer's Disease n.: The tendency of the undisciplined C programmer to set arbitrary but supposedly generous static limits on table sizes (defined, if you're lucky, by constants in header files) rather than taking the trouble to do proper dynamic storage allocation.-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Sun May 05 2002 - 14:04:18 EDT