On 19/04/02 14:46, "Humphreys, David (URB)" <david.humphreys_at_honeywell.com>
wrote:
[snip!]
> Conclusion: We are dealing with such low powers here that it simply is
> not a problem.
>
> Go ahead! Overclock with impunity:)
David,
Thanks for your clear, yet thorough explanation. I'll see what Mr. PCBMan
has to offer, overclocking-wise and I'll be more confident in trying it!
-Laurent.
-- ===================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ********************** Usual disclaimers apply ********************** fat electrons n.: Old-time hacker David Cargill's theory on the causation of computer glitches. Your typical electric utility draws its line current out of the big generators with a pair of coil taps located near the top of the dynamo. When the normal tap brushes get dirty, they take them off line to clean them up, and use special auxiliary taps on the bottom of the coil. Now, this is a problem, because when they do that they get not ordinary or `thin' electrons, but the fat'n'sloppy electrons that are heavier and so settle to the bottom of the generator. These flow down ordinary wires just fine, but when they have to turn a sharp corner (as in an integrated-circuit via), they're apt to get stuck. This is what causes computer glitches.-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Sun May 05 2002 - 14:04:31 EDT