Hi Guys
The link is here:
http://www.unna.org/unna/apple/documentation/Inside%20Newton2000/Inside%20the%20Newton%20MP2K.
txt
Lot's of naughty spaces in the URL (%20)
It was a bit too careful if you ask me. First I removed the battery from
my previously unopened newton and carefully unclipped the clips in the
battery compartment and then the hinge side, then I wiggled the two
halves of the newt carefully (but not too carefully and eventually the
case came undone with no broken clips and no cracks etc.
You just need to be careful.
Anyway, everything is great. The SER-001 is probably the best newt buy
you can get.
Thanks ever do much PCBman
Regards
Paul Randall (UK)
On Saturday, August 3, 2002, at 11:33 am, newtontalk_at_newtontalk.net
wrote:
> ...................
>> I have downloaded the case removal instructions from Mike O'Connor of
>> Leptonic Systems Inc. on unna and am ready to go.
>>
>
> Paul,
> Where on unna are the case removal instructions?
>
> Good luck with your install!
>
> Greg
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.chuma.org/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net/
This archive was generated by hypermail 2.1.2 : Thu Sep 05 2002 - 10:02:21 EDT