I have the same behaviour with my 3C589D card.
But I assume that this is an matter of saving battery power:
the light on the dongle (showing that the connection is powered) switches on
as soon as you try to connect via Ethernet and stays on for the duration of
the connection (at least in my case).
So try to establish a connection after you re-inserted the card once aftyer
powering up the Newt.
But after switching on the Newt I have to eject and re-insert the card in
order to get it initialized.
I already intended to ask the list if there is no software solution to
initialize the card?
Any comments?
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Daniel Ho
> Sent: Tuesday, February 19, 2002 8:52 AM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] Help!: A Half Recognized D-Link DE-660+
>
>
>
> After loading up the the Newton Devices, NIE Ethernet, and Internet Setup
> from NIE 2.0, I proceeded to download and install the ATLAN
> multi-driver for
> the DE-660+
>
> When I insert the card now, it is recognized as a DE-660+, however the
> lights on the dongle don't stay on. After a few seconds, the lights turn
> off and won't come back until I eject and re-insert the card.
>
> Anybody have a guess as to what's wrong? The card seems to work fine in a
> PC laptop.
>
> Thanks,
> Dan
>
>
> --
> Daniel Ho/Toronto
> hod_at_mac.com
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe or manage: visit the above link or
> mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
>
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sat Mar 02 2002 - 10:03:18 EST