On 21/02/02 00:57, "Chris Chapman" <pan1k_at_earthlink.net> wrote:
> On 2/20/02 8:25 PM, "Alex" <admeddemda_at_f-m.fm> wrote:
>
>> =20
>>> =20
>>>> Ok. I tried first setting the modem prefs to "use left pc card" (I
>>>> assume that's the 'lower' slot). No luck. Then, I downloaded the
>>>> megahertz driver from the url posted onlist (thanks!). Installed it,
>>>> and set modem prefs to use 'XJ2144'. Again, no luck.
>>>> =20
>>>> I'm stumped. The connection slip goes as far as "loading the PPP
>>>> driver" and then fails, with an error '-16022'
>>> =20
>>> You didn't pick the right slot, as another reader pointed out. IIRC, tha=
> t's
>>> the reason why you're getting the -16022 exception, as, IIRC, means miss=
> ing
>>> resources, or something like that, namely, it's missing your modem!
>>> =20
>>> -Laurent.
>> =20
>> =20
>> no, I tried both slots, one after the other, then when that didnt
>> work, i reset the modem prefs, then re-tried both slots, etc...
>> =20
>> so bAsically, I tried all the options available....
>> =20
>> Still can't get the modem to work
>> (it's not a pcmcia slot prob, bc the mem card works in both slots)
>> =20
>> if anyone has any further advice, it'd be appreciated.
>> =20
> Uhm, AFAIK, your internet setup has to indicate which slot the modem is in.
> Just having the modem prefs setup doesn=B9t do it. Re-check your internet
> setup to make sure you've picked the right slot.
Exactly. You have to specify in the internet setup which slot the modem is
in, and obviously have to stick the modem physically in that slot...
-Laurent.
-- ===================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ********************** Usual disclaimers apply ********************** card walloper n.: An EDP programmer who grinds out batch programs that do stupid things like print people's paychecks. Compare code grinder. See also punched card, eighty-column mind.-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sat Mar 02 2002 - 10:03:30 EST