I have never heared of such a problem before.
But if you do not mind opening your Newt you could check if a damaged switch
is the problem. The reset switch is easy accessable after removing the back
cover. Using a short piece of wire you can shortcut the switch and check if
the Newt performs a reset.
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of David Orriss Jr
> Sent: Friday, June 07, 2002 12:34 PM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] Reset button -- doesn't!
>
>
>
> I have to MP2100/UPG that have the same problem -- neither of them respond
> to the reset button. Is this a known problem that happens to newtons
> eventually? What's the recommended way to repair this?
>
> --
> David Orriss Jr.
> dave_at_davenet.net
> http://www.davenet.net
> http://www.codeskanks.com
>
> Please email me if you want my ICQ/AIM/IM ID's.
>
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:01:54 EDT