on 3/5/02 3:29 PM, eric a . Farris at eafarris_at_bigfoot.com wrote:
> let's start from the beginning... does anyone have this working with
> this exact card? chuma's site mentions the 3CXE589EC. this is NOT that
> card. it is the 3CCE589ET. it looks just like the card on the chuma
> website (http://www.chuma.org/newton/ethernet/epics/3cxe589EC.jpg)
> except this one has a pigtail instead of the xjack. That would be the
> "X" in the xjack model's number, but the "C" for it vs. the "T" on mine
> has me a little worried. perhaps i'm working an unsolvable problem:
> perhaps this card is not supported.
>
> With the Farallon driver + patches the Newton recognizes the card as a
> "Megahertz 589E".
Eric,
I got out my 3CCE589ET and installed the 3c589.pkg. Tested the card with
NCU and NetHopper ... worked fine.
What I have installed:
NIE 2.0 (which consists of)
Newton Internet Enabler.pkg
NIE Modem-Serial Support.pkg
InternetSetup.pkg
ISP Template.pkg
NIE Extras (which consists of)
Newton Devices.pkg
NIE Ethernet Support.pkg
Farallon Support
FarallonEthernet.pkg
3Com patch for the Farallon driver
3c589.pkg
Some of those aren't absolutely required for ethernet but that's what's
on my Newt and it works.
Make sure your internet setup has all the correct numbers, passwords and
usernames in it and you should have not a problem.
Peter
-- Have you checked the FAQ lately? http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net To unsubscribe/manage: visit the above link. Questions: victor_at_newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:02:16 EST