I am not sure, we should ask Mr. PCB man.
But if present, the only solution I would see is to have a kind of
microswitch to force the initialisation manually - the serial Mini-DIN
connector is fully used.
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of James Witte
> Sent: Tuesday, March 26, 2002 4:37 PM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] SER-001 and keyboard initialization
>
>
>
> > Kbd in order to get it recognised. (there is a special pin on
> the dongle to
> > force that initialisation, thus there is no need to switch the
> Newt on/off
>
> Is the pin to force serial initialization present on the internal
> connector that the SER-001 hooks to that the 001 could use?
>
> Jim
>
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:03:35 EST