Re: [NTLK] My First Newton

From: scOtty Technoir (tick0001_at_algonquincollege.com)
Date: Mon Sep 16 2002 - 10:54:48 PDT


> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Laurent Daudelin
>
> You need a compatible printer and a proper cable. With the usual serial
> cable you get with a Newton, you're limited to a few printers. You can try
> to get a PrintPack, which is part hardware and software. The hardware part
> is a serial to parallel converter, so that you can print to a lot of PC
> printers. If you get an AppleTalk network (over Ethernet or
> LocalTalk), then
> you can print to (almost) any PostScript printer.
>
> -Laurent.
> --
> ==================================================================
> =========
> Laurent Daudelin Developer, Multifamily, ESO,
> Fannie Mae
> mailto:Laurent_Daudelin_at_fanniemae.com
> Washington, DC, USA
> ************************* Usual disclaimers apply

is there a means of printing from OMP to stylewriter 1200? the chooser lists
a generic stylewriter driver [SW I?]. a print attempt results in thr
printer waking up and getting ready to go, but the newt reports there's no
printer connected.
the 1200 works great with the mp2K though :]

>>st

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.chuma.org/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net/


This archive was generated by hypermail 2.1.5 : Mon May 26 2003 - 12:59:21 PDT