From: John Skinner (john_at_johnskinner.net)
Date: Tue Sep 17 2002 - 09:53:03 PDT
My setup is the same as Ashley's and I have no problem getting a DHCP
address through a Graphite Base Station.
On 9/17/02 8:13 AM, "Ashley Campbell" <awc2_at_buyclamsonline.com> wrote:
>
> On Tuesday, September 17, 2002, at 05:59 AM, Ren=E9 Groot wrote:
>
>>
>> My experience: the Newton will not connect if the base station it =
> is=3D20
>> actually connected through is NOT the one that serves the DHCP. In=3D20
>> other words, if there is a router or another station behind it, =
> that=3D20
>> acts as DHCP servers, it will typically error out. If you can move=3D20
>> closer to the base station that actually serves these, you're lucky.=20=
>
>> If=3D20=3D
>
> That's strange. I have a graphite AirPort base station set up to act as=20=
>
> a wireless-wired bridge, which connects via a 10/100 switch to my=20
> Westell DSL modem, which connects to the wall. The DHCP is all the way=20=
>
> at my DSL provider's office, and the whole setup works just fine. It=20
> seems that I've lucked out and missed a lot of the wireless problems=20
> that people are having.
>
> -awc
>
>
-- -- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.chuma.org/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net/
This archive was generated by hypermail 2.1.5 : Mon May 26 2003 - 12:59:21 PDT