Re: [NTLK] Is this newton dead?

From: Christian Burk (cmburk75_at_mac.com)
Date: Mon Apr 14 2003 - 15:07:04 PDT


Newton is dead no more. I took out everything as suggested in the link
below around 9 a.m. Then, around 5 p.m., I plugged the power adapter
back in, with an immediate restart. The message was something to the
effect that the Newton restored because there had lost all power.
The date was set at July 8, 1996 (a special date?).

When I set my cards in, memory and modem, everything seemed to be just
fine.

I'm so glad.

Now, another question if anyone knows, can one get and e-mail through
.mac? Last time I tried (when it was still free and called iTools), I
couldn't send due to an problem with "authorization," which I never
understood. Any suggestions.

On Monday, April 14, 2003, at 04:58 PM, Tony Kan wrote:

> Victor
>
> I'm having the same problems as Christian. I attempted the power drain
> reset but I'm not getting the result I'm looking for. I left the
> machine
> without cards or batteries overnight. After pressing the reset button
> the
> splash screen starts momentarily and then the machine goes dead again.
> A
> moment later the splash screen displays again and then dies. It seems
> to
> cycle through this once every second for about twenty seconds before
> dying
> altogether.
>
> It has been a week since I backed up and that has just occurred to me
> that I
> haven't written down my registration number for Moreinfo anywhere so
> even if
> the machine is dead I would still like to retrieve information from it.
>
> Any assistance regarding this matter would be greatly appreciated.
>
> Cheers
> Tony.
>
>
> Quoting Christian Burk <cmburk75_at_mac.com>:
>
>> Well, I insert the modem card and in short order, the newton shuts
>> down. I can't figure out how to get it running again. I've plugged it
>> in, held down the power key while hitting the reset button and vice
>> versa. I've removed the battery and the cards while doing this. I've
>> also kept them in while doing. Nothing.
>
> Do a "power-drain" reset as described here:
>
> http://www.chuma.org/newton/faq/newton-faq-nos.html#IIIB2d

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Mon Apr 14 2003 - 15:30:00 PDT