Re: [NTLK] eMate hinge problem

From: JuanM (juanm_at_mac.com)
Date: Sun Apr 20 2003 - 11:48:35 PDT

• Next message: JuanM: "Re: [NTLK] eMate hinge problem"
• Previous message: klich: "Re: [NTLK] Text-to-speech for Newt Books"
• In reply to: Woody: "Re: [NTLK] eMate hinge problem"
• Next in thread: Helvécio Mafra: "Re: [NTLK] coordinate systems conversion"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Thanks for the words of encouragement Woody. Perhaps I will try it.

Thanks

Juan

On Saturday, April 19, 2003, at 09:27 PM, Woody wrote:

> Go ahead and give it a try. I have opened and repaired the springs on
> both of my sons' eMates without problem. Luckily neither of the cables
> were damaged. Because there are a number of small screws and parts I
> used a large serving tray to contain all the parts and followed the
> directions to the letter. I tried bothe the soldering method and the
> non soldering method and prefer the soldering approach. A side note
> the
> first proiblem that we had with one of the emates was a broken
> backlight
> wire I repaired that by soldering in a piece of telephone wire. thazt
> was actually easier than unsoldering and resoldering the wires when I
> repaired the springs.
>
> Woody

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/

• Next message: JuanM: "Re: [NTLK] eMate hinge problem"
• Previous message: klich: "Re: [NTLK] Text-to-speech for Newt Books"
• In reply to: Woody: "Re: [NTLK] eMate hinge problem"
• Next in thread: Helvécio Mafra: "Re: [NTLK] coordinate systems conversion"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.5 : Sun Apr 20 2003 - 12:00:00 PDT