From: Steve Tedder (teasip_at_cox.net)
Date: Sun Apr 27 2003 - 13:29:44 PDT
If you can talk to the Newton through the hub with NCU, the hub is
probably OK.
You can check by connecting the Mac directly to the Newton with a
crossover Ethernet cable, so you bypass the hub.
On Sunday, April 27, 2003, at 01:31 PM, Jeff Andrusin wrote:
>
> i have a 400mhz g4 tower running 10.2.5 or 9.2.2
> (can boot either way)and have no problem in 9.2.2
> with NCU, but big problems with everything else
> that tries to communicate with the newt: escale,
> etc.
>
> i am wondering if my old 10base T assante hub
> might be the culprit?? any ideas
>
>
-- Steve Tedder A unit vector is a vector that has a magnitude of exactly 1 and points in a particular direction. It lacks both dimension and unit. Its sole purpose is to point, that is, to specify a direction. -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Sun Apr 27 2003 - 20:30:01 PDT