Re: [NTLK] Connecting to a PC

From: George Nix (gnix_at_macrevs.com)
Date: Tue Feb 04 2003 - 09:46:30 PST


Hans,

I have this exact setup on my (Toshiba) laptop at work and it is working
fine. I will have to check tomorrow (Wed) at work and I can respond as to
the exact settings. I did have problems initially, but as I recall, it had
to do with the laptop's serial port assignment. I am currently connecting
via Serial to COM1 through NCU. The cable I have is the original Newton to
PC cable (8-pin Mini Din to 9-pin serial). More later...

George Nix
So. California Newt User
2100U/130MP
>
> I've got a 2100, a serial cable, a Win98 Toshiba laptop, and NCU
> for Win. I can't get the Newt to dock, though. I've set the Newt
> to connect via Serial, and set the port on NCU to COM1 and COM2,
> but neither work. Does anyone have any suggestions as to what
> might be going wrong?
>
> Thanks.
>
> Hans Derycke
> --
> E pur si muove
> --

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Tue Feb 04 2003 - 10:30:00 PST