From: Laurent Daudelin (laurent_daudelin_at_fanniemae.com)
Date: Tue Jun 10 2003 - 08:55:05 PDT
On 10/06/03 11:46, "Tom McDougal" <tmcdougal_at_newted.org> wrote:
> With the TCP/Serial extension I can get NTK to run under OS X
> (Classic mode), but I cannot for the life of me get NTK and my MP to
> communicate over ethernet, whether under System 9 or OS X. I *can*
> get NCU to work over ethernet, so the hardware is all ok. I have
> installed TCP Serial on the Mac, and followed all instructions. The
> FAQ is most explicit about using PortShareDemo. I found lots of
> discussion on this topic in the archives. From the sound of it, most
> people installed TCPSerial and everything worked immediately.
>
> If the LED on my ethernet card is any indication, the problem seems
> to be more on the MP end of things. The first time I try to connect
> (e.g., using the "other computer" option), the LED lights on, then
> off, then on -- in the usual pattern when first connecting -- but
> then turns off and stays off. When I try to connect a second time,
> the LED never lights at all.
>
> The Toolkit app is set to use Appletalk (ethertalk).
>
> Any suggestions?
>
> -Tom
The only thing I can think of is to make sure that AppleTalk in Classic is
set to use Ethernet.
-Laurent.
-- =========================================================================== Laurent Daudelin Developer, Multifamily, ESO, Fannie Mae mailto:Laurent_Daudelin_at_fanniemae.com Washington, DC, USA ************************* Usual disclaimers apply ************************* -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Tue Jun 10 2003 - 09:30:00 PDT