From: Andrew Maier (andrew_at_maier.name)
Date: Wed Mar 12 2003 - 13:38:21 PST
On Wed, Mar 12, 2003 at 02:42:07PM +0100, Joost van de Griek wrote:
> On 2003-03-12 14:02, "Andrew Maier" <andrew_at_maier.name> wrote:
>
> > This just sounds like the problem I had. I then discovered that when
> > pushing the cable towards the card I could get a connection. Of course
> > theis was nothing but itrying to make a better contact to the cables on
> > the connector. Try to disassemble the connector on the card sinde. If I
> > remember correctly you can slide the connector back (after pressing a
> > small dip) You will see immediately if the connection is well soldered
> > or not. If if not you at least have ruled out this possibility.
>
> You are right. I ripped open the connector, and sure enough, one of the
> wires has come loose. I shall visit the friendly neighbourhood sysadmins,
> and ask them for their soldering equipment.
>
Glad you could sort it out. I'm sure you'll get it fixed.
Andrew
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Thu Mar 13 2003 - 04:00:00 PST