From: don porter (don.porter_at_mindspring.com)
Date: Thu Mar 13 2003 - 14:47:39 PST
We used a flex cable thru the side of the case. If you look at the seam of the case where the lid is you can spot a small plastic plug. The plug was removed and we connected to the internal serial connection on the PCB.
-------Original Message-------
From: Karel Jansens <kareljansens_at_tiscalinet.be>
Sent: 03/13/03 11:29 AM
To: newtontalk_at_newtontalk.net
Subject: Re: [NTLK] Newton II: A gentler approach
>
> On Thursday 13 March 2003 23:01, don porter wrote:
> Yes it is.
Something I wanted to ask, but only realized after I wiped your original
post: what connector was used for the keyboard?
And, more importantly, is there a chance in hell such a connector could be
re-implemented by a gifted (or insane) Newton enthousiast?
-- Jazz. ======================================================== VapourSig.net 2003 has been postponed indefinitely ======================================================== -- This is the NewtonTalk list - <a target=_blank href="http://www.newtontalk.net/">http://www.newtontalk.net/> for all inquiries List FAQ/Etiquette/Terms: <a target=_blank href="http://www.newtontalk.net/faq.html">http://www.newtontalk.net/faq.html> Official Newton FAQ: <a target=_blank href="http://www.chuma.org/newton/faq/">http://www.chuma.org/newton/faq/> > -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Thu Mar 13 2003 - 12:30:00 PST