From: donald (marchie_at_mac.com)
Date: Thu Mar 13 2003 - 12:03:26 PST
Ok COOL!
Just as we were talking about a breakout connection where the SER-001
port goes, we could put a flex cable out the side slot, and a breakout
on the top w/o one serial port, thus making it smaller.
~Donald
On Thursday, March 13, 2003, at 05:47 PM, don porter wrote:
> We used a flex cable thru the side of the case. If you look at the
> seam of the case where the lid is you can spot a small plastic plug.
> The plug was removed and we connected to the internal serial
> connection on the PCB.
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Thu Mar 13 2003 - 12:30:00 PST