Re: [NTLK] Other WiFi/Escale problems.

From: Paul Guyot (pguyot_at_kallisys.net)
Date: Fri Jan 23 2004 - 16:44:04 PST


On Fri, 23 Jan 2004, Bruce E. Durocher II wrote:

> I managed to alter my settings for my Lucent Technologies Wavelan
> Turbo Silver and can't get Escale to work with it again. My Newton
> 2100 Lucent WaveLAN/IEEE screen is set at Infrastructure, Channel 11
> (ignored), Use Roaming and Power Management on. My Internet Setup is
> DHCP Server, my Dock settings are TCP/IP, use ZeroConf. My 10.2.8
> Powerbook is set at Using DHCP, Appletalk is Automatic, I have enabled
> Appletalk in Directory Access, and my firewall is open at port 3679.
> Yet, when I try to connect and after the Newton correctly sees the
> Powerbook by asking for it as a server, I get "waiting for response"
> for awhile and then "cannot reach the server." Any suggestions as to
> what I might try next, outside of a serial cable? Thanks!

Did you try Dock TCP 1.1 module?

If not, this is the same old known bug in Dock TCP 1.0.

You'll find the 1.1 here:
http://www.kallisys.com/files/newton/DCL/

Paul

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/


This archive was generated by hypermail 2.1.5 : Fri Jan 23 2004 - 21:30:01 PST