From: Peter H. Coffin (hellsop_at_ninehells.com)
Date: Fri Jul 02 2004 - 08:16:43 PDT
On Thu, Jul 01, 2004 at 08:41:40PM -0700, Chris Adams wrote:
> I was wondering if it is possible to connect a eMate 300, to a Quadra
> 800 running Open Transport 1.1.2 and LocalTalk Bridge, via LocalTalk
> with phonenet being the hardware. So far I can connect to NCU just
> fine with this hardware setup, but I can't seem to get tcp packets to
> encapsulate FROM the ethernet to the eMate or TO the eMate from the
> ethernet. I am working on getting a PCMCIA NIC in the mean time, but
> I would like to see if I can get this to work until I get set NIC.
NewtonOS doesn't know to look for TCP encapsulated in Appletalk packets.
It knows about TCP on serial lines via PPP, it knows about raw TCP on
ethernet cards and things that look like ethernet cards, and that's
about it. So, coping with IP inside Appletalk won't happen until someone
writes a driver for it.
--
"Friendship is born at that moment when one person says to another, 'What!
You too? I thought I was the only one!'"
--C.S. Lewis
--
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Fri Jul 16 2004 - 08:03:20 PDT